云平臺部署：基于Arduino與機智云的家居環境遠程系統設計

基于Arduino與機智云的家居環境遠程監控系統具備協議簡單、成本低、功耗低、組網容易等優勢。在智慧家居實現的同時，可以根據其它控制領域的需要，進行需求的移植，具有很強的延伸性和可移植性，提高開發效率。同時當前環境也存在這樣的需求也有硬件基礎保障。通過該項目的制作，也讓我了解到遠程家電控制并不是什么神奇的東西的，只要每一個人肯去嘗試，肯去面對不同的困難，并通過自己的思考和向他人請求幫助，每一個過程都是很奇妙的，往往在這個過程中，你會獲得許多意想不到的收獲。

本項目分成三部分——工程實施、云平臺部署、APP開發，本次分享云平臺部署部分。

一、創建項目

1.1 登陸機智云開發者中心dev.gizwits.com，創建新產品

1.2 進入項目，查看產品的基本信息

二、添加數據點

2.1 根據產品功能定義數據點

三、進行虛擬設備調試

3.1 創建好數據點后，進行虛擬設備調試

3.2 在機智云APP能夠觀察機智云平臺模擬的數據

根據系統的需要添加或修改數據點信息

四、下載MCU代碼包

4.1 在確定數據點無誤后，點擊MCU開發

4.2 添加庫文件，進行代碼移植

生成代碼包后，把代碼包導入Arduino IDE開發環境的libraries文件中，libraries是Arduino的庫文件，包含自帶的庫文件和用戶添加的外部庫文件

把networkConfig.ino的配網代碼移植到simpleTry.ino,把串口打印的代碼注釋起來，可參考“史上最詳細的Arduino uno R3接入機智云教程”

https://club.gizwits.com/thread-6728-1-1.html

然后根據要求修改代碼，以下僅供參考：

#include #include #include #include int con_ledPin = 13; //成功連接網絡，13引腳低電平int smokePin = 2;int movePin = 3;int alarmPin = 4;int ledPin = 5;int relayPin1 = 8;int relayPin2 = 9;int firePin = A0;int lightPin = A1;int beepPin = 10;int temhumPin = 11;bool alarmflag = 0;dht myDHT_11;SoftwareSerial mySerial(A2, A3); // A2 -> RX, A3 -> TXGizwits myGizwits;#define KEY1 6#define KEY2 7#define KEY1_SHORT_PRESS 1#define KEY1_LONG_PRESS 2#define KEY2_SHORT_PRESS 4#define KEY2_LONG_PRESS 8#define NO_KEY 0#define KEY_LONG_TIMER 3#define ALARM_SHORT_PRESS 16#define ALARM_LONG_PRESS 32unsigned long Last_KeyTime = 0;
unsigned long gokit_time_s(void){ return millis() / 1000;}char gokit_key1down(void){ unsigned long keep_time = 0; if (digitalRead(KEY1) == LOW) { delay(100); if (digitalRead(KEY1) == LOW) { keep_time = gokit_time_s(); while (digitalRead(KEY1) == LOW) { if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER) { Last_KeyTime = gokit_time_s(); return KEY1_LONG_PRESS; } } //until open the key if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER) { return KEY1_SHORT_PRESS; } return 0; } return 0; } return 0;}char gokit_key2down(void){ unsigned long keep_time = 0; if (digitalRead(KEY2) == LOW) { delay(100); if (digitalRead(KEY2) == LOW) { delay(100); if (digitalRead(KEY2) == LOW) { keep_time = gokit_time_s(); while (digitalRead(KEY2) == LOW) //until open the key { if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER) { Last_KeyTime = gokit_time_s(); return KEY2_LONG_PRESS; } } if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER) { return KEY2_SHORT_PRESS; } return 0; } return 0; } return 0;}//室內報警監測char gokit_alarmdown(void){ unsigned long keep_time = 0; if (digitalRead(alarmPin) == LOW) { delay(100); if (digitalRead(alarmPin) == LOW) { keep_time = gokit_time_s(); while (digitalRead(alarmPin) == LOW) //until open the key { if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER) { Last_KeyTime = gokit_time_s(); return ALARM_LONG_PRESS; } } if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER) { return ALARM_SHORT_PRESS; } return 0; } return 0; } return 0;}char gokit_keydown(void){ char ret = 0; ret |= gokit_alarmdown(); ret |= gokit_key2down(); ret |= gokit_key1down(); return ret;}void KEY_Handle(void){ /* Press for over than 3 second is Long Press */ switch (gokit_keydown()) { case KEY1_SHORT_PRESS: myGizwits.setBindMode(WIFI_PRODUCTION_TEST); break; case KEY1_LONG_PRESS: myGizwits.setBindMode(WIFI_RESET_MODE); break; case KEY2_SHORT_PRESS: myGizwits.setBindMode(WIFI_SOFTAP_MODE); //Soft AP mode break; case KEY2_LONG_PRESS: myGizwits.setBindMode(WIFI_AIRLINK_MODE); //AirLink mode break; case ALARM_SHORT_PRESS: alarmflag = ((alarmflag == 0) ? 1 : 0); if (alarmflag) { digitalWrite(beepPin, LOW); } else { digitalWrite(beepPin, HIGH); } break; case ALARM_LONG_PRESS: digitalWrite(ledPin, HIGH); //設置為高電平 digitalWrite(relayPin1, HIGH); //設置為高電平 digitalWrite(relayPin2, HIGH); //設置為高電平 break; default: break; }}//獲取溫度數據int dht_11_gettemperature() { int chk = myDHT_11.read11(temhumPin); int value = myDHT_11.temperature; return value;}//獲取濕度數據int dht_11_gethumidity() { int chk = myDHT_11.read11(temhumPin); int value = myDHT_11.humidity; return value;}/** Serial Init , Gizwits Init @param none @return none*/void setup() { // put your setup code here, to run once: mySerial.begin(115200); pinMode(KEY1, INPUT_PULLUP); pinMode(KEY2, INPUT_PULLUP); pinMode(smokePin, INPUT); //設置為數字輸入模式 pinMode(movePin, INPUT); pinMode(alarmPin, INPUT_PULLUP); pinMode(firePin, INPUT); pinMode(lightPin, INPUT); //模擬量為輸入模式 pinMode(beepPin, OUTPUT); //設置為數字輸出模式 pinMode(ledPin, OUTPUT); pinMode(relayPin1, OUTPUT); pinMode(relayPin2, OUTPUT); pinMode(con_ledPin, OUTPUT); digitalWrite(beepPin, HIGH); //設置為高電平 myGizwits.begin();}void wifiStatusHandle(){ if (myGizwits.wifiHasBeenSet(WIFI_CON_ROUTER)) { digitalWrite(con_ledPin, HIGH); //設置為低電平 digitalWrite(ledPin, HIGH); //設置為高電平 digitalWrite(relayPin1, HIGH); //設置為高電平 digitalWrite(relayPin2, HIGH); //設置為高電平 }}/** Arduino loop @param none @return none*/void loop() { //Configure network //if(XXX) //Trigger Condition //myGizwits.setBindMode(0x02); //0x01:Enter AP Mode;0x02:Enter Airlink Mode bool varW_Alarm = alarmflag;//Add Sensor Data Collection myGizwits.write(VALUE_Alarm, varW_Alarm); unsigned long varW_fire = analogRead(firePin);//Add Sensor Data Collection myGizwits.write(VALUE_fire, varW_fire); unsigned long varW_Move_Test = digitalRead(movePin);//Add Sensor Data Collection myGizwits.write(VALUE_Move_Test, varW_Move_Test); unsigned long varW_Tem = dht_11_gettemperature();//Add Sensor Data Collection myGizwits.write(VALUE_Tem, varW_Tem); unsigned long varW_Hum = dht_11_gethumidity();//Add Sensor Data Collection myGizwits.write(VALUE_Hum, varW_Hum); unsigned long varW_Light = analogRead(lightPin);//Add Sensor Data Collection myGizwits.write(VALUE_Light, varW_Light); bool varR_LED_OnOff = 0; if (myGizwits.hasBeenSet(EVENT_LED_OnOff)) { myGizwits.read(EVENT_LED_OnOff, &varR_LED_OnOff); //Address for storing data if (varR_LED_OnOff == 0) { digitalWrite(ledPin, HIGH); } else { digitalWrite(ledPin, LOW); } } bool varR_Relay_1 = 0; if (myGizwits.hasBeenSet(EVENT_Relay_1)) { myGizwits.read(EVENT_Relay_1, &varR_Relay_1); //Address for storing data if (varR_Relay_1 == 0) { digitalWrite(relayPin1, HIGH); } else { digitalWrite(relayPin1, LOW); } } bool varR_Relay_2 = 0; if (myGizwits.hasBeenSet(EVENT_Relay_2)) { myGizwits.read(EVENT_Relay_2, &varR_Relay_2); //Address for storing data if (varR_Relay_2 == 0) { digitalWrite(relayPin2, HIGH); } else { digitalWrite(relayPin2, LOW); } } bool varR_beep = 0; if (myGizwits.hasBeenSet(EVENT_beep)) { myGizwits.read(EVENT_beep, &varR_beep); //Address for storing data if (varR_beep == 0 ) { digitalWrite(beepPin, HIGH); } else { digitalWrite(beepPin, LOW); } } KEY_Handle(); wifiStatusHandle(); myGizwits.process();}

五、下載Android開發代碼包

5.1 在應用開發生成APP代碼包

通過Android Studio軟件導入項目進行編譯，因版本問題需要修改關鍵詞，compile 均替換為implementation，testcompile均替換為testimplementation，可參考以下代碼：

apply plugin: 'com.android.application'
android { compileSdkVersion 25 buildToolsVersion '28.0.2' useLibrary 'org.apache.http.legacy' defaultConfig { applicationId "com.gizwits.opensource.appkit" minSdkVersion 16 targetSdkVersion 25 versionCode 1 versionName "2.5.1.072715" multiDexEnabled true } buildTypes { release { minifyEnabled false proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro' } }}
dependencies { implementation fileTree(dir: 'libs', include: ['*.jar']) implementation 'com.android.support.constraint1.1.0' testImplementation 'junit4.12' implementation 'com.android.support24.2.1' implementation files('libs/BLEasyConfig.jar') implementation files('libs/easylink2.0.jar') implementation files('libs/GizWifiSDK.jar') implementation files('libs/jpush-android-2.1.5.jar') implementation files('libs/Lark7618SDK_noudp1606031910_0101.jar') implementation files('libs/libammsdk.jar') implementation files('libs/libForEElink.jar') implementation files('libs/LSFSK_1.0.jar') implementation files('libs/ltlink2.jar') implementation files('libs/mta-sdk-1.6.2.jar') implementation files('libs/OneShotConfig.jar') implementation files('libs/open_sdk_r5756.jar') implementation files('libs/pushservice-5.6.0.30.jar') implementation files('libs/simpleconfigwizardlib.jar') implementation files('libs/xUtils-2.6.14.jar') implementation files('libs/zxing.jar') implementation 'com.android.support25.3.0' implementation 'com.yanzhenjie1.0.5'}

同時可參考“基于機智云AIoT平臺的Android開源app修改教程”https://www.sohu.com/a/476083681_486728

使項目成功編譯

原文地址：https://blog.csdn.net/a6662580/category_11596658.html