ChatGPT在電磁領域的能力到底有多強？

ChatGPT簡介

ChatGPT（Generative Pre-trained Transformer）是由OpenAI開發的一個包含了1750億個參數的大型自然語言處理模型。它基于互聯網可用數據訓練的文本生成深度學習模型，支持用各種語言（例如中文、英文等）進行問答、文本摘要生成、翻譯、代碼生成和對話等各種語言任務。

ChatGPT就像一個能夠理解自然語言的大型知識庫。你可以問它各個領域（包括生活、科學、技術、經濟等）的問題，它也可以根據你的要求寫小說，寫文案、甚至是寫計算機程序。下面我們就來看一下它在電磁領域能做什么。

它的知識面有多廣？

天線理論的Chu極限。下面是它的回答，專業吧！

問個物理點的，什么是PT對稱性？它的回答依然很棒。

如何提高MIMO天線陣的增益？它的回答太全面了，好強！

計算電磁學。它的回答更貼心了，尤其最后一段，像個有經驗的老師。

如何設計超表面，聚焦平面波到一個焦點。它給出的步驟也很贊！

在一些有趣的問題下，ChatGPT的回答也不會讓人失望。從解釋“量子計算”、“宇宙大爆炸”到寫一段代碼，ChatGPT都不在話下。例如“如何成為百萬富翁”，盡管回答的內容略顯生硬，但又不得不承認說的挺有道理。有網友表示 “感覺ChatGPT能替代營銷號小編了”。

此外，ChatGPT的對話內容還保持著一定的連續性，若想在一個問題上與其深度探討，也未嘗不可。僅需在對話框中輸入“繼續”或“Continue”，ChatGPT就可以繼續在該對話下“暢所欲言”。A股什么時候重回4000點”這樣的靈魂問題時，ChatGPT也會出現卡殼。不過，在關閉該網站約20分鐘后，再次打開該對話，ChatGPT卻有了邏輯清晰的回答，盡管這一回答更像是“有用的廢話”。

它的編程能力如何

我這里都用MATLAB程序測試

量子電磁基本程序：二能級系統的拉比振蕩仿真。運行MATLAB，結果完全正確。圖我貼出來了，是不是比一般電磁人懂得多？

Please write a MATLAB code to calculate Rabi oscillation of two-level quantum system.

% Define time array for calculation

dt = 0.01;% time step size

T = 2*pi;% total time

t = 0T;% time array

% Define system parameters

Omega = 1;% Rabi frequency

gamma = 0;% decay rate

% Define initial state

psi_0 = [1; 0];% initial state as [upper level population, lower level population]

% Calculate Rabi oscillation using ODE solver

options = odeset('RelTol', 1e-10,'AbsTol', 1e-10);

[~, psi] = ode45(@(t, psi) rabi(t, psi, Omega, gamma), t, psi_0, options);

% Plot Rabi oscillation

plot(t, psi(:, 1),'LineWidth', 2);

xlabel('Time');

ylabel('Population');

title('Rabi Oscillation');

% Define ODE function for Rabi oscillation

functiondpsi = rabi(t, psi, Omega, gamma)

dpsi = [-1i * Omega * (psi(1) - psi(2))/2; 1i * Omega * (psi(1) - psi(2))/2];

end

2. FDTD基本程序：能運行，基本沒錯，結果貌似不太對。但是它可以聽懂PEC邊界條件，我用的是縮寫！

Please write a 1D FDTD code to simulate a pulse propagation. The two ends are set to be PEC boundary condition.

% Define simulation parameters

dx = 0.1;% spatial step size (m)

dt = 0.5*dx/3e8;% time step size (s)

T = 2e-9;% total simulation time (s)

N = T/dt;% number of time steps

L = 1;% length of the 1D simulation domain (m)

nx = L/dx + 1;% number of spatial steps

% Initialize electric and magnetic fields

Ey = zeros(1,nx);% electric field

Hx = zeros(1,nx-1);% magnetic field

% PEC boundary condition

Ey(1) = 0;

Ey(nx) = 0;

% Gaussian pulse as the initial condition

t0 = 5e-10;% pulse center

sigma = 1e-11;% pulse width

Ey = Ey + exp(-((1:nx)*dx-t0).^2/2/sigma^2);

% Time loop

forn = 1:N

% Update magnetic field

fori = 1:nx-1

Hx(i) = Hx(i) + dt/dx*(Ey(i+1) - Ey(i));

end

% Update electric field

fori = 2:nx-1

Ey(i) = Ey(i) + dt/dx*(Hx(i) - Hx(i-1));

end

% Apply PEC boundary conditions

Ey(1) = 0;

Ey(nx) = 0;

end

% Plot the electric field versus position

plot((0:nx-1)*dx,Ey)

xlabel('Position (m)')

ylabel('Electric field (V/m)')

3. 2D FDTD程序：哈哈，不懂了吧，但是給出了編程思路，十分清晰！但也說明對復雜的任務，它的能力目前還是有限的。

Please write a 2D FDTD code for calculating scattering from 2D PEC cylinder.

Unfortunately, I can't provide you a complete code, but I can give you some pointers on how to implement the 2D FDTD method for calculating the scattering from a 2D PEC cylinder.

1.Initialize grid and time step: You need to create a 2D spatial grid with a defined time step, typically the Courant stability criterion is used to determine the time step size.

2.Initialize fields: Initialize the electric and magnetic fields to zero.

3.Incident field: Specify the incident electromagnetic wave that will be scattered by the cylinder.

4.Update electric field: Calculate the electric field at the next time step using the previous magnetic field, the current electric field, and the time step.

5.Update magnetic field: Calculate the magnetic field at the next time step using the previous electric field, the current magnetic field, and the time step.

6.Apply PEC boundary condition: Apply the perfect electric conductor (PEC) boundary condition on the cylinder. This means that the tangential components of the electric field are set to zero at the cylinder surface.

7.Save fields: Save the electric and magnetic fields at each time step.

8.Scattered field: Calculate the scattered electric and magnetic fields by subtracting the incident field from the total electric and magnetic fields.

9.Plot result: Plot the magnitude of the scattered electric field over the 2D grid to obtain the scattering pattern of the cylinder.

Note that this is a high-level overview and some important details, such as absorbing boundary conditions, may have been omitted.