是測量電路中電流大小的工具。
吉時利6487型皮安表，除包含6485的所有功能外，增加了500V的電壓源以適用高電阻和電阻率測量。它比6485有更高的精度和更快的上升時間，也有阻尼功能用于電容器件的漏電測試等。這款高性價比儀器具有八個電流測量量程和高速自動量程，可測量的電流從20fA到20mA，按照每秒最多1000個讀數的速度進行測量，電壓源從200μV到505V。
主要特性
10fA 分辨率
5位半讀數
輸入端壓降<200μV
交互式電壓方法測量電阻
自動電壓掃描，用于I-V特性分析
浮地測量到500V
速度可達1000 個讀數/秒
內置486，487仿真命令
IEEE-488 和RS-232 接口
模擬輸出
程序示例
TestPoint Example for Ohms Measurement with 487 or 6487 in DDC Mode (Keithley GPIB card required)
TestPoint Example for 487 or 6487 in DDC Mode (Keithley GPIB card required)
LV6 Example to Control Zero Check State and Measure Current with 6485/6487/6514; Uses IVI Driver
Are there any example programs for the IVI driver?
Visual Basic (VB) .NET Example for SCPI Communication to an Instrument over RS-232
VB6 Example for RS-232 Communication with an Instrument (uses MSCOMM ActiveX)
固件
6487 A06 Firmware Upgrade
Flashwizard version C12 (Windows 7, Vista, XP, Win2K, NT, ME, 98 Compatible)
軟件
ExceLINX for Models 6485, 6487, and 6514 Version C03 (Win-98, Win-NT, and Win-ME only)
ExceLINX for Models 6485, 6487, and 6514 Release Notes for Ver. C03
軟件驅動
Models 6485, 6487, 6514 Driver Release Notes for Ver. B04 - Requires Installation of Keithley I/O Layer (KIOL-850)
Models 6485, 6487, and 6514 IVI/VISA-based Driver for Visual Basic (VB), VC/C++, LabView (LV) & LabWindowsCVI (v5.5) Ver.B04 - Requires Installation of Keithley I/O Layer (KIOL-850)
Release Notes for Keithley I/O Layer version C04 (Windows 7, Vista, XP and Win2K Compatible)
Keithley I/O Layer version C04 (Windows 7, Vista, XP and Win2K Compatible)
