資料介紹
為克服傳統GPS定位系統在室內或建筑物密集區存在盲點的缺陷,更好地滿足個人定位的需求,基于GPSOne技術,提出了一種便攜式個人定位終端的設計與實現方案。該終端由定位單元、主控單元MCU、UIM單元、LED顯示等模塊組成,其中定位單元使用AnyData公司的DTGS-800 GPSOne模塊,主控單元選用超低功耗的16位單片機MSP430F147,借助于AT指令與CDMA網絡實現了對個人的位置監控、定位和報警等功能。測試結果表明,該終端的定位誤差室外小于20 m,室內小于500 m,初始定位時間小于20 s,報警信息能在1 s內傳送到CDMA網絡控制中心。
- Abstract:
- ?In order to overcome the defects that the traditional GPS positioning system exists blind spots in the areas signal shield, and to meet the needs of personal location,this paper presents a design and implementation scheme of a personal positioning system based on GPSOne technology.The terminal was composed of the main control unit(MSP430F147), positioning unit(DTGS-800),UIM element, LED display modules and other modules.This system is designed to realize personal position monitoring and indication with the help of the AT command and CDMA network.A portable and easy-to-use terminal unit with low power consumption was implemented.Test results show that the terminal positioning error is less than 20 m outdoor and 500 m indoor,the initial positioning time is less than 20 s,and alarm information can be transmitted to the CDMA network control center within 1s.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 基于uClinux的GPSOne/GPS雙定位的信息接收系統
- 采用UWB和TDoA技術的定位標簽源碼 30次下載
- 工業級低成本GPS北斗定位模塊GNSS模塊SKG125規格書
- 基于NB-IoT終端的指紋匹配定位算法 4次下載
- 使用機器視覺技術實現工業機器人定位系統 9次下載
- 移動機器人的導航定位和地圖構建技術綜述 22次下載
- 如何才能實現移動機器人的導航定位和地圖構建技術 22次下載
- 機器人的定位技術有哪些 0次下載
- 藍牙室內定位方案:關于終端側定位與網絡側定位的區別分析 21次下載
- 基于北斗差分定位技術的車載終端研究 4次下載
- 基于CDMA網絡的移動終端定位技術 35次下載
- 基于SOPC的雙定位終端系統設計
- 基于MapX技術的個人便攜式定位系統設計
- 基于GPS/GIS/GSM 的移動機器人定位技術研究
- 基于地圖的移動機器人定位技術新進展
- 利爾達Module基站定位應用筆記 524次閱讀
- RTK定位技術原理和誤差分析 8523次閱讀
- 九種室內定位技術概覽 室內定位技術的原理和應用場景 1.7w次閱讀
- 基于靜態傳感器節點的定位技術 485次閱讀
- 機器人定位是如何實現的? 1037次閱讀
- 基于DTGS-800和MSP430單片機實現個人定位終端的設計 2162次閱讀
- 基于LPC2210芯片和uClinux實現導航定位信息獲取模塊的設計 1703次閱讀
- 關于物聯網的四大定位技術介紹 4994次閱讀
- 深度剖析自動駕駛和機器人定位技術 3519次閱讀
- 淺談自動駕駛和機器人定位技術 4833次閱讀
- 物聯網智能精神病人定位方案解析 3144次閱讀
- GPS定位技術中的GPS模塊 4083次閱讀
- uwb定位技術優劣勢有哪些_uwb定位技術的應用 3w次閱讀
- 關于幾種室內無線定位技術介紹 2.1w次閱讀
- 什么是基站定位_基站定位的原理及特點 4.3w次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1489次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 92次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 10次下載 | 免費
- 6基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 3次下載 | 免費
- 8藍牙設備在嵌入式領域的廣泛應用
- 0.63 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30319次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233045次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多