資料介紹
如何選擇合適的LED為高灣照明
高灣照明市場正在準備一個大的轉變LED技術。這是由LED燈的價格下降,以及傳感器和控制的進步,這是用來幫助進一步降低能源消耗,使投資回報率(ROI)。高灣照明在商業和工業環境中的應用現在很好地利用LED在節約能源方面的優勢,并盡量減少停機時間。
Navigant的研究(Boulder、CO)預測,全球銷售高灣燈具將增加到2017,幾乎達到170億美元,主要由更昂貴的LED燈具在新建和改造的采用率將上升。
Navigant的研究指出,LED技術的改進也推動了這一轉變,使LED照明這些滿足廣域空間”的嚴格要求,同時最大限度地減少對比度,減少眩光,并在許多情況下,滿足嚴格的安全和危險環境的要求。”。
For lighting designers to develop the most cost-effective luminaires that take advantage of LED technology, they need to select the right emitters for the job. These LEDs must be able to meet high-output lumen requirements while simplifying heat management and delivering the right amount of light distribution.
There are many ways to integrate LEDs into high-bay luminaire applications, and there are a number of considerations and/or trade-offs for designers that range from thermal designs (heatsinking) and optical control to driver selection and pricing. Designers of high-bay lighting systems may also want to start looking at incorporating sensors, networking, and other advanced lighting controls to further energy savings and cost reductions, but that is beyond the scope of what we are exploring here. In this article we will take a look at several LED solutions that meet the performance, as well as deliver the cost savings required for high-bay applications, including Cree‘s XLamp XM-L2 and XLamp XP-E2 and Philips Lumileds’ Luxeon R and Luxeon TX.
- 詳解SUNLORD順絡LED照明 18次下載
- 如何在開關電源設計中選擇最合適的高功率電感的磁芯方案
- LED照明及驅動器基本知識培訓PPT 55次下載
- LED照明技術創新發展綜述 0次下載
- 如何在機器視覺系統中選擇合適的照明系統 6次下載
- 如何正確的選擇LED照明驅動芯片
- 室內照明LED球泡燈CQC標準中文介紹 29次下載
- 驅動LED:如何選擇合適的電源 19次下載
- 脫機LED照明簡化 7次下載
- 基于LED的高開間燈具設計技巧 4次下載
- 考慮LED照明系統陶瓷蓋 4次下載
- 如何選擇合適的LED照明電源 10次下載
- 智能 LED 照明系統的無線網絡選擇 6次下載
- 為便攜式MFF顯示器選擇合適的LED背光驅動器
- 為汽車照明應用選擇HB LED驅動器
- LED照明驅動IC U6237D的主要特征 738次閱讀
- 如何選擇合適的電容 1971次閱讀
- 為LED照明增添智能 530次閱讀
- 為正確的工作選擇合適的穩壓器:組件選擇 692次閱讀
- 為您的應用選擇合適的射頻放大器的指南 741次閱讀
- 為MAX14922選擇合適的N溝道MOSFET用于高邊工業輸出應用 1597次閱讀
- 汽車內部照明LED驅動結構與拓?fù)浣Y(jié)構的分析 1771次閱讀
- 如何為LED燈選擇合適的驅動芯片 5237次閱讀
- 如何解決LED照明中的發熱問題 1w次閱讀
- 如何為LED光源選擇合適的驅動電源 4388次閱讀
- 未來可能的幾種汽車LED照明驅動創新方案 1622次閱讀
- 基于AVR的LED照明燈控制系統設計 1492次閱讀
- 最佳熱管理方法助力優化汽車LED照明系統 1330次閱讀
- 專家教你如何選取LED照明驅動芯片 3598次閱讀
- 淺談LED照明驅動IC的選擇準則 952次閱讀
下載排行
本周
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 126次下載 | 1 積分
- 2H橋中的電流感測
- 545.39KB | 7次下載 | 免費
- 3雷達的基本分類方法
- 1.25 MB | 4次下載 | 4 積分
- 4I3C–下一代串行通信接口
- 608.47KB | 3次下載 | 免費
- 5電感技術講解
- 827.73 KB | 2次下載 | 免費
- 6從 MSP430? MCU 到 MSPM0 MCU 的遷移指南
- 1.17MB | 2次下載 | 免費
- 7有源低通濾波器設計應用說明
- 1.12MB | 2次下載 | 免費
- 8RA-Eco-RA2E1-48PIN-V1.0開發板資料
- 35.59 MB | 2次下載 | 免費
本月
- 12024年工控與通信行業上游發展趨勢和熱點解讀
- 2.61 MB | 763次下載 | 免費
- 2HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 126次下載 | 1 積分
- 3繼電保護原理
- 2.80 MB | 36次下載 | 免費
- 4正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 32次下載 | 1 積分
- 5labview實現DBC在界面加載配置
- 0.57 MB | 21次下載 | 5 積分
- 6在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 7GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 13次下載 | 免費
- 8PADS-3D庫文件
- 2.70 MB | 10次下載 | 2 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多