MAX706.pdf MAX707.pdf MAX708.pdf

supervisory circuits reduce the complexity and number
of components required to monitor power-supply and
battery functions in μP systems. These devices significantly
improve system reliability and accuracy compared
to separate ICs or discrete components.
The MAX705/MAX706/MAX813L provide four functions:
1) A reset output during power-up, power-down, and
brownout conditions.
2) An independent watchdog output that goes low if
the watchdog input has not been toggled within 1.6
seconds.
3) A 1.25V threshold detector for power-fail warning,
low-battery detection, or for monitoring a power supply
other than +5V.
4) An active-low manual-reset input.
The MAX707/MAX708 are the same as the MAX705/
MAX706, except an active-high reset is substituted for
the watchdog timer. The MAX813L is the same as the
MAX705, except RESET is provided instead of RESET.
Two supply-voltage monitor levels are available: The
MAX705/MAX707/MAX813L generate a reset pulse when
the supply voltage drops below 4.65V, while the
MAX706/MAX708 generate a reset pulse below 4.40V.
All four parts are available in 8-pin DIP, SO and μMAX
packages.
_______________________Applications
Computers
Controllers
Intelligent Instruments
Automotive Systems
Critical μP Power Monitoring

? μMAX Package: Smallest 8-Pin SO
? Guaranteed RESET Valid at VCC = 1V
? Precision Supply-Voltage Monitor
4.65V in MAX705/MAX707/MAX813L
4.40V in MAX706/MAX708
? 200ms Reset Pulse Width
? Debounced TTL/CMOS-Compatible
Manual-Reset Input
? Independent Watchdog Timer—1.6sec Timeout
(MAX705/MAX706)
? Active-High Reset Output
(MAX707/MAX708/MAX813L)
? Voltage Monitor for Power-Fail or Low-Battery
Warning