MAX3006, MAX3007, MAX3008 pdf

MAX3000E/MAX3001E在V_CC一側的I/O具有±15kV ESD保護，在外部信號切換應用場合提供更強的保護。MAX3000E能夠可靠工作在230kbps的數據速率下；MAX3001E確保數據速率達4Mbps；MAX3002–MAX3012在整個工作電壓范圍內可提供20Mbps的數據速率。

MAX3000E/MAX3001E/MAX3002–MAX3012的V_L電壓范圍為+1.2V至+5.5V，V_CC電壓范圍為+1.65V至+5.5V。這對于低電壓ASIC/PLD與高電壓系統之間的數據傳輸非常理想。MAX3000E/MAX3001E/MAX3002”MAX3012采用20引腳UCSP?封裝或20引腳TSSOP封裝。

The MAX3000E/MAX3001E/MAX3002–MAX3012
8-channel level translators provide the level shifting necessary
to allow data transfer in a multivoltage system.
Externally applied voltages, VCC and VL, set the logic levels
on either side of the device. Logic signals present on
the VL side of the device appear as a higher voltage logic
signal on the VCC side of the device, and vice-versa.
The MAX3000E/MAX3001E/MAX3002/MAX3003 use an
architecture specifically designed to be bidirectional
without the use of a directional pin.
The MAX3000E/MAX3001E/MAX3002/MAX3004–MAX3012
feature an EN input that, when low, reduces the VCC and
VL supply currents to < 2μA. The MAX3000E/MAX3001E
also have ±15kV ESD protection on the I/O VCC side for
greater protection in applications that route signals
externally. The MAX3000E operates at a guaranteed data
rate of 230kbps. The MAX3001E operates at a guaranteed
data rate of 4Mbps. The MAX3002–MAX3012 operate at a
guaranteed data rate of 20Mbps over the entire specified
operating voltage range.
The MAX3000E/MAX3001E/MAX3002–MAX3012 accept
VL voltages from +1.2V to +5.5V and VCC voltages from
+1.65V to +5.5V, making them ideal for data transfer
between low-voltage ASICs/PLDs and higher voltage
systems. The MAX3000E/MAX3001E/MAX3002–
MAX3012 are available in 20-bump UCSP?, 20-pin
TQFN (5mm x 5mm), and 20-pin TSSOP packages.