MAX4789, MAX4790, MAX4791 pdf

The MAX4789–MAX4794 family of switches feature
internal current limiting to prevent damage to host
devices due to faulty load conditions. These analog
switches have a low 0.2Ω on-resistance and operate
from 2.3V to 5.5V input voltage range. They are available
with guaranteed 200mA, 250mA, and 300mA current
limits, making them ideal for SDIO and other load
switching applications.
When the switch is on and a load is connected to the
port, a guaranteed blanking time of 14ms ensures that
the transient voltages settle down. If after this blanking
time the load current is greater than the current limit,
the MAX4789, MAX4791, and MAX4793 enter a latchoff
state where the switch is turned off and FLAG is
issued to the microprocessor. The switch can be turned
on again by cycling the power or the ON pin.
The MAX4790, MAX4792, and MAX4794 have an
autoretry feature where the switch turns off after the
blanking time and then continuously checks to see if
the overload condition is present. The switch remains
on after the overload condition disappears.
The MAX4789–MAX4794 are available in 6-pin 3mm x
3mm TDFN and tiny space-saving 4-pin SOT143 packages.
The MAX4789/MAX4790/MAX4791/MAX4793 are
also available in a tiny 5-pin SOT23 package. For lower
current current-limiting switches, refer to the MAX4785–
MAX4788 data sheet.
Applications
PDAs and Palmtop Devices
Cell Phones
GPS Systems
Handheld Devices
SDIO