資料介紹
The SN74AUP1T87 performs the Boolean function Y = A ⊕ B with designation for logic-level translation applications with output referenced to supply VCC.
AUP technology is the industry’s lowest-power logic technology designed for use in extending battery-life in operating. All input levels that accept 1.8-V LVCMOS signals, while operating from either a single 3.3-V or 2.5-V VCC supply. This product also maintains excellent signal integrity (see Figure 1 and Figure 2).
The wide VCC range of 2.3 V to 3.6 V allows the possibility of switching output level to connect to external controllers or processors.
Schmitt-trigger inputs (VT = 210 mV between positive and negative input transitions) offer improved noise immunity during switching transitions, which is especially useful on analog mixed-mode designs. Schmitt-trigger inputs reject input noise, ensure integrity of output signals, and allow for slow input signal transition.
Ioff is a feature that allows for powered-down conditions (VCC = 0 V) and is important in portable and mobile applications. When VCC = 0 V, signals in the range from 0 V to 3.6 V can be applied to the inputs and outputs of the device. No damage occurs to the device under these conditions.
The SN74AUP1T87 is designed with optimized current-drive capability of 4 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.
- SN74AUP1T98,pdf(Single-Supply
- SN74AUP1T97,pdf(Single-Supply
- SN74AUP1T58,pdf(Single-Supply
- SN74AUP1T57,pdf(Single-Supply
- SN74AUP1T86,pdf(Low Power, 1.8
- SN74AUP1T32,pdf(Low Power, 1.8
- SN74AUP1T17,pdf(Low Power, 1.8
- SN74AUP1T158,pdf(Low Power, 1.
- SN74AUP1T157,pdf(Low Power, 1.
- SN74AUP1T14,pdf(Low Power, 1.8
- SN74AUP1T08,pdf(Low Power, 1.8
- SN74AUP1T04,pdf(Low Power, 1.8
- SN74AUP1T02,pdf(Low Power, 1.8
- SN74AUP1T00,pdf(Low Power, 1.8
- SN74AUP1G74,pdf(Low-Power Sing
- 芯片功耗的Power弱連接分析(1) 361次閱讀
- Power Divider和Power Splitter 1550次閱讀
- DS1685/87和DS17X85/87訪問擴展用戶RAM 1066次閱讀
- 與小數T1和E1接口 1300次閱讀
- T1和E1之間的轉換 1667次閱讀
- 1000BASE-T|100m|RJ-45 SFP|FCLF8521P2BTL 2066次閱讀
- 淺談SN74HC541特征應用及設備信息 3570次閱讀
- 分享SN74HC541N集成塊的功能及邏輯圖函數表 1.1w次閱讀
- 一文解析74ls244和74hc244區別 1.9w次閱讀
- 74ls163實現任意進制計數器 8.7w次閱讀
- 74ls02中文資料匯總(74ls02引腳圖及功能_真值表及應用電路) 18.9w次閱讀
- Low Power概念介紹<SRPG Cell> 1.2w次閱讀
- SN74LS161在數字電路中的抗干擾應用 7065次閱讀
- PIC18F87J72設計的單相電能檢測技術 1555次閱讀
- KTY87溫度傳感器電流變送器電路圖 2956次閱讀
下載排行
本周
- 1ADE-12H混頻器規格書
- 0.28 MB | 1次下載 | 5 積分
- 2AD9984A高性能10位顯示接口英文手冊
- 0.49 MB | 1次下載 | 5 積分
- 351開發板芯片資料
- 14.95 MB | 1次下載 | 1 積分
- 4用TL431LI-Q1監控電流供應
- 176.71KB | 1次下載 | 免費
- 5十進制數據轉十六進制字符_轉ASCII碼
- 0.01 MB | 次下載 | 免費
- 6使用TRF7970A進行NFC主動和被動點對點通信
- 926.87KB | 次下載 | 免費
- 7LP8864-Q1 LP8864S-Q1 LP8866-Q1和LP8866S-Q1診斷說明和故障處理程序
- 577.42KB | 次下載 | 免費
- 8將設計移植到LP3470A低lq電壓監控器,以改善電源監控
- 115.28KB | 次下載 | 免費
本月
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 129次下載 | 1 積分
- 2正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 36次下載 | 1 積分
- 3GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 20次下載 | 免費
- 4在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 5幾張電動車充電器電路圖
- 0.23 MB | 9次下載 | 1 積分
- 6AD18學習筆記
- 14.47 MB | 8次下載 | 2 積分
- 7H橋中的電流感測
- 545.39KB | 7次下載 | 免費
- 8電機驅動器電路板布局的最佳實踐
- 3.03MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多