BQ24156A,pdf(Fully Integrated Switch Mode One Cell Li-Ion Ch
資料介紹
The bq24153A/6A/8 is a compact, flexible, high-efficiency, USB-friendly switch-mode charge management device
for single-cell Li-ion and Li-polymer batteries used in a wide range of portable applications. The charge
parameters can be programmed through an I2C interface. The IC integrates a synchronous PWM controller,
power MOSFETs, input current sensing, high-accuracy current and voltage regulation, and charge termination,
into a small WCSP package.
The IC charges the battery in three phases: conditioning, constant current and constant voltage. The input
current is automatically limited to the value set by the host. Charge is terminated based on battery voltage and
user-selectable minimum current level. A safety timer with reset control provides a safety backup for I2C
interface. During normal operation, The IC automatically restarts the charge cycle if the battery voltage falls
below an internal threshold and automatically enters sleep mode or high impedance mode when the input supply
is removed. The charge status can be reported to the host using the I2C interface. During the charging process,
the IC monitors its junction temperature (TJ) and reduces the charge current once TJ increases to about 125°C.
To support USB OTG device, bq24153A/8 can provide VBUS (5.05V) by boosting the battery voltage. The IC is
available in 20-pin WCSP package.
- BQ24153A,pdf(Fully Integrated Switch Mode One Cell Li-Ion Ch
- BQ24901,pdf(Single-Cell Li-Ion
- bq24151A,BQ24150A,pdf(Fully In
- bq24741,BQ24742,pdf(Li-Ion or
- bq24610,bq24617,pdf(Stand-Alone Synchronous Switch-Mode Li-I
- BQ24180,pdf(Fully Integrated S
- BQ24155,pdf(Fully Integrated S
- bq24153,bq24156,bq24158,pdf(Fu
- BQ28400,bq28401,pdf(Tablet PC
- BQ26500,pdf(Single Cell Li-Ion
- BQ26501,pdf(Single-Cell Li-Ion
- bq27010,bq27210,pdf(Li-Ion and
- BQ6400,pdf(Single Chip Li-Ion
- RT9503 datasheet,pdf資料(Fully I
- ISL9201 pdf datasheet (Li-ion
- Li-ion/Polymer二次電池的應用方案 200次閱讀
- EPCM3568A-LI屏幕分辨率和開機logo設置 275次閱讀
- DVFS hierarchy低功耗A72后端實戰案例 585次閱讀
- 如何將Klayout Cell動態導入Lumerical Multiphysics 471次閱讀
- 什么是Isolation Cell?低功耗設計基礎—Isolation Cell 4391次閱讀
- 淺談特種鋰電池的特點 549次閱讀
- 用碳化硅MOSFET設計一個雙向降壓-升壓轉換器 2526次閱讀
- 微雪電子鋰電池擴展板Li-ion Battey HAT簡介 1657次閱讀
- 一個基于可編程邏輯的便攜式鋰聚合物電池的管理系統設計方案淺析 909次閱讀
- TI BQ25892電池充電管理IC 1.9w次閱讀
- 如何延長電池壽命,通過LDO、電壓監控器和FET實現 2071次閱讀
- 鋰離子電池的組成,鋰離子電池的短路保護 4778次閱讀
- 談談鋰離子電池使用安全性 3508次閱讀
- TI可編程多化合物快速充電管理參考設計 1145次閱讀
- In-Cell/On-Cell/OGS屏幕全面解析 1w次閱讀
下載排行
本周
- 1基于波形捕獲的超聲波傳感水流量計量技術應用說明
- 1.01MB | 1次下載 | 免費
- 2TMS320F2837x與TMS320F2838x之間的移植應用說明
- 312.67KB | 1次下載 | 免費
- 3ADE-12H混頻器規格書
- 0.28 MB | 1次下載 | 5 積分
- 4AD9984A高性能10位顯示接口英文手冊
- 0.49 MB | 1次下載 | 5 積分
- 551開發板芯片資料
- 14.95 MB | 1次下載 | 1 積分
- 6用TL431LI-Q1監控電流供應
- 176.71KB | 1次下載 | 免費
- 7具有霍爾效應開關的 HMI 翹板開關應用說明
- 3.22MB | 次下載 | 免費
- 8評估AFE74xx的跳頻能力應用說明
- 1.35MB | 次下載 | 免費
本月
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 129次下載 | 1 積分
- 2正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 36次下載 | 1 積分
- 3GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 18次下載 | 免費
- 4在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 5幾張電動車充電器電路圖
- 0.23 MB | 8次下載 | 1 積分
- 6AD18學習筆記
- 14.47 MB | 8次下載 | 2 積分
- 7H橋中的電流感測
- 545.39KB | 7次下載 | 免費
- 8電機驅動器電路板布局的最佳實踐
- 3.03MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多