資料介紹
The MAX1112/MAX1113 low-power, 8-bit, 8-channel analog-to-digital converters (ADCs) feature an internal track/hold, voltage reference, clock, and serial interface. They operate from a single 4.5V to 5.5V supply and consume only 135μA while sampling at rates up to 50ksps. The MAX1112's 8 analog inputs and the MAX1113's 4 analog inputs are software-configurable, allowing unipolar/bipolar and single-ended/differential operation.
Successive-approximation conversions are performed using either the internal clock or an external serial-interface clock. The full-scale analog input range is determined by the 4.096V internal reference, or by an externally applied reference ranging from 1V to VDD. The 4-wire serial interface is compatible with the SPI?, QSPI?, and MICROWIRE? serial-interface standards. A serial-strobe output provides the end-of-conversion signal for interrupt-driven processors.
The MAX1112/MAX1113 have a software-programmable, 2μA automatic power-down mode to minimize power consumption. Using power-down, the supply current is reduced to 13μA at 1ksps, and only 82μA at 10ksps. Power-down can also be controlled using the active-low SHDN input pin. Accessing the serial interface automatically powers up the device.
The MAX1112 is available in a 20-pin SSOP package. The MAX1113 is available in a small 16-pin QSOP package.
- ADS1112精密、連續自校準模數轉換器(ADC)數據表
- DDC118八路電流輸入、20位模數轉換器數據表
- AD9681:八進制、14位、125 MSPS、串行LVDS、1.8 V模數轉換器數據表
- AD9655:雙16位125 MSPS串行LVDS,1.8 V模數轉換器數據表
- LTC2452:帶串行外圍接口的超小型差分16位ΔΣ模數轉換器產品手冊
- AD9637:八進制、12位、40/80 MSPS、串行LVDS、1.8 V模數轉換器數據表
- AD9635: 雙通道、12位、80 MSPS/125 MSPS串行LVDS 1.8 V模數轉換器
- AD9644:14位串行模數轉換器入門必讀資料 1次下載
- 多通道14位串行AD轉換器MAX1148 13次下載
- MAX1227/MAX1229/MAX1231,pdf (300ksps ADC) 24次下載
- MAX1226, MAX1228, MAX1230,pdf
- MAX1076/MAX1078,中文資料,pdf datas
- 使用帶模數轉換器的八位微控制器PIC16C711的模數轉換器
- 串行AD轉換器MAX186及其應用
- MAX1076-MAX1078中文資料pdf
- RA6T2的16位模數轉換器操作 [14] 驗證應用項目 248次閱讀
- RA6T2的16位模數轉換器操作 [13] 運行應用項目 224次閱讀
- 模數轉換器的技術參數詳解 909次閱讀
- 模數轉換器的工作原理、分類及應用 816次閱讀
- RA6T2的16位模數轉換器操作 [2] A/D轉換器概述 (2) 221次閱讀
- RA6T2的16位模數轉換器操作 [1] 簡介,A/D轉換器概述 185次閱讀
- ADC模數轉換器的延時原理 766次閱讀
- 芯品 l 低功耗、單通道、單端輸入12位模數轉換器RS1461 680次閱讀
- 使用Maxim ADC測量MAX40016上的電流 1175次閱讀
- 串行逐次逼近型模數轉換器MAX1132的性能特點及應用 1126次閱讀
- 模數轉換器分類_模數轉換器選型 5571次閱讀
- 如何降低模數轉換器的性能 3990次閱讀
- 8位串行模數轉換器TLC548、TLC549的應用 9080次閱讀
- 模數轉換器的工作原理與分類特點詳解 4452次閱讀
- 小白必看:模數轉換器應用典型電路設計詳細解析 2.2w次閱讀
下載排行
本周
- 1ADE-12H混頻器規格書
- 0.28 MB | 1次下載 | 5 積分
- 2AD9984A高性能10位顯示接口英文手冊
- 0.49 MB | 1次下載 | 5 積分
- 351開發板芯片資料
- 14.95 MB | 1次下載 | 1 積分
- 4用TL431LI-Q1監控電流供應
- 176.71KB | 1次下載 | 免費
- 5十進制數據轉十六進制字符_轉ASCII碼
- 0.01 MB | 次下載 | 免費
- 6使用TRF7970A進行NFC主動和被動點對點通信
- 926.87KB | 次下載 | 免費
- 7LP8864-Q1 LP8864S-Q1 LP8866-Q1和LP8866S-Q1診斷說明和故障處理程序
- 577.42KB | 次下載 | 免費
- 8將設計移植到LP3470A低lq電壓監控器,以改善電源監控
- 115.28KB | 次下載 | 免費
本月
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 129次下載 | 1 積分
- 2正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 36次下載 | 1 積分
- 3GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 20次下載 | 免費
- 4在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 5幾張電動車充電器電路圖
- 0.23 MB | 9次下載 | 1 積分
- 6AD18學習筆記
- 14.47 MB | 8次下載 | 2 積分
- 7H橋中的電流感測
- 545.39KB | 7次下載 | 免費
- 8電機驅動器電路板布局的最佳實踐
- 3.03MB | 6次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多