資料介紹
This document describes the features of the NI cRIO-9066 and contains information about mounting and operating the device. You can connect the cRIO-9066 to a host computer or network and configure the startup options using the USB device port or the RJ-45 Gigabit Ethernet port 1. Tip Refer to the getting started guide on ni.com/manuals for basic configuration instructions and information about connecting to a host computer using the USB device port. NI recommends using the USB device port for configuration, debug, and maintenance. Connecting the cRIO-9066 to the Host Computer or Network Using Ethernet Complete the following steps to connect the cRIO-9066 to a host computer or Ethernet network using the RJ-45 Gigabit Ethernet port 1. NI recommends using the RJ-45 Gigabit Ethernet port 1 for communication with deployed systems. 1. Power on the host computer or Ethernet hub. 2. Connect the RJ-45 Gigabit Ethernet port 1 on the cRIO-9066 to the host computer or Ethernet hub using a standard Category 5 (CAT-5) or better shielded, twisted-pair Ethernet cable.
- 基于ARM與FPGA的嵌入式實時圖像處理平臺
- 實現基于FPGA的SPIFlash控制器設計
- 如何使用DSP和FPGA進行嵌入式同步控制器的實現 9次下載
- 基于ARM核的系列微控制器的嵌入式開發工具MDK 2次下載
- 嵌入式運動控制器設計 2次下載
- 嵌入式系統的實時控制模塊設計與實現 10次下載
- GUS系列嵌入式運動控制器規格及尺寸圖 10次下載
- CX5000系列嵌入式控制器實現RGV小車的控制平臺 4次下載
- 基于嵌入式實時操作系統的運動控制器的研究與應用 19次下載
- 基于μC/OS-Ⅱ的嵌入式洗碗機控制器的設計與實現 12次下載
- 嵌入式控制器OP7200及應用
- 基于ARM+FPGA的可重構控制器設計及其在加載系統中的應用
- 遠程控制中的嵌入式控制器系統的開發
- 嵌入式液壓控制器的實現
- 基于實時操作系統的嵌入式控制器的設計
- 嵌入式微處理器與嵌入式微控制器的區別 1074次閱讀
- 嵌入式fpga是什么意思 997次閱讀
- fpga是嵌入式嗎 1770次閱讀
- fpga與嵌入式的區別 嵌入式和fpga開發有什么關系 6054次閱讀
- 基于嵌入式微控制器與FPGA通過配置的效率和靈活性 2202次閱讀
- 基于嵌入式工控模塊和μC/OS-II實現車載狀態監控系統的設計 1908次閱讀
- 米爾科技嵌入式實時操作系統介紹 2181次閱讀
- 嵌入式MultiBus-CPU模塊設計可滿足工業現場的測控需要 1039次閱讀
- 使用GD32的嵌入式實時控制系統 4942次閱讀
- 關于嵌入式Linux系統實時進程調度算法系統詳解 3288次閱讀
- 運行在基于FPGA的嵌入式系統上的智能家居控制器設計過程詳解 2628次閱讀
- 基于ARM與DSP的嵌入式運動控制器設計詳解 7265次閱讀
- 基于C51的嵌入式實時控制模塊的設計與實現 1227次閱讀
- 基于ARM和FPGA的嵌入式數控系統設計 6184次閱讀
- 基于CORBA技術的嵌入式控制器設計 1659次閱讀
下載排行
本周
- 1TC358743XBG評估板參考手冊
- 1.36 MB | 330次下載 | 免費
- 2開關電源基礎知識
- 5.73 MB | 11次下載 | 免費
- 3100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 4嵌入式linux-聊天程序設計
- 0.60 MB | 3次下載 | 免費
- 5DIY動手組裝LED電子顯示屏
- 0.98 MB | 3次下載 | 免費
- 6基于FPGA的C8051F單片機開發板設計
- 0.70 MB | 2次下載 | 免費
- 751單片機PM2.5檢測系統程序
- 0.83 MB | 2次下載 | 免費
- 8基于51單片機的RGB調色燈程序仿真
- 0.86 MB | 2次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 2555集成電路應用800例(新編版)
- 0.00 MB | 33566次下載 | 免費
- 3接口電路圖大全
- 未知 | 30323次下載 | 免費
- 4開關電源設計實例指南
- 未知 | 21549次下載 | 免費
- 5電氣工程師手冊免費下載(新編第二版pdf電子書)
- 0.00 MB | 15349次下載 | 免費
- 6數字電路基礎pdf(下載)
- 未知 | 13750次下載 | 免費
- 7電子制作實例集錦 下載
- 未知 | 8113次下載 | 免費
- 8《LED驅動電路設計》 溫德爾著
- 0.00 MB | 6656次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935054次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537797次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420027次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234315次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191186次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183279次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138040次下載 | 免費
評論
查看更多