mp2681輸入/輸出控制器電動(dòng)工具應(yīng)用的單芯片解決方案

　　The MP2681 is a highly integrated Li-Ion or Lipolymer switch mode battery charge controller with full protection and status indication. This part integrates a precision voltage reference and charge status indications suitable for AC adapter input and cradle charger applications. The MP2681 automatically detects the battery cell through a battery ID resistor and regulates the battery voltage according to the corresponding cell configurations： 3S1P， 3S2P， 4S1P， 4S2P， 5S1P and 5S2P. Then， the AC adapter output is automatically regulated according to the battery configuration chosen. Additionally， if the battery pack does not have an ID resistor， the charge termination voltage can be configured by setting a dedicated voltage to the ID pin according to the six pre-set VID values representing each battery configuration. The MP2681 charges the battery in three phases： pre-charge， constant current and constant voltage. Charge is terminated when the current reaches a minimum set level. An internal charge timer provides safety backup. The MP2681 provides a fixed pre-charge mode for deeply-discharged batteries and safety features that include battery temperature monitoring， NTC control， charge time-out and fault control. MP2681 is available in a 16-pin SOIC package.