2.7伏至5.5伏140微米軌對軌輸出8位DAC在SOT-23轉換器AD5300

　　The AD5300 is a single， 8-bit buffered voltage output DAC that operates from a single 2.7 V to 5.5 V supply， consuming 115 μA at 3 V. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The AD5300 uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with standard SPI?， QSPI?， MICROWIRE?， and DSP interface standards. The reference for the AD53001 is derived from the power supply inputs and thus gives the widest dynamic output range. The part incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V and remains there until a valid write takes place to the device. The part contains a power-down feature that reduces the current consumption of the device to 200 nA at 5 V and provides software selectable output loads while in powerdown mode. The part is put into power-down mode over the serial interface. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 0.7 mW at 5 V， reducing to 1 μW in power-down mode.