11/14位5.7GSPS射頻數(shù)模轉(zhuǎn)換器ad9119/ad9129數(shù)據(jù)表

　　The AD9119/AD9129 are high performance， 11-/14-bit RF digitalto-analog converters （DACs） supporting data rates up to 2.85 GSPS. The DAC core is based on a quad-switch architecture that enables dual-edge clocking operation， effectively increasing the DAC update rate to 5.7 GSPS when configured for Mix-Mode? or 2× interpolation. The high dynamic range and bandwidth enable multicarrier generation up to 4.2 GHz. In baseband mode， wide bandwidth capability combines with high dynamic range to support from 1 to 158 contiguous carriers for CATV infrastructure applications. A choice of two optional 2× interpolation filters is available to simplify the postreconstruction filter by effectively increasing the DAC update rate by a factor of 2. In Mix-Mode operation， the AD9119/AD9129 can reconstruct RF carriers in the second and third Nyquist zone while still maintaining exceptional dynamic range up to 4.2 GHz. The high performance NMOS DAC core features a quad-switch architecture that enables industry-leading direct RF synthesis performance with minimal loss in output power. The output current can be programmed over a range of 9.5 mA to 34.4 mA. The AD9119/AD9129 include several features that may further simplify system integration. A dual-port， source synchronous LVDS interface simplifies the data interface to a host FPGA/ASIC. A differential frame/parity bit is also included to monitor the integrity of the interface. On-chip delay locked loops （DLLs） optimize timing between different clock domains. A serial peripheral interface （SPI） configures the AD9119/ AD9129 and monitors the status of readback registers. The AD9119/AD9129 are manufactured on a 0.18 μm CMOS process and operates from +1.8 V and ?1.5 V supplies. It is supplied in a 160-ball chip scale package ball grid array.