資料介紹
This application note describes CAN protocol driver software routines written in ‘C’ for the members of the Siemens 16-bit microcontroller family C166 which are equipped with an on-chip CAN module (e.g. C167CR, C164CI).
1 Introduction3
1.1 Abstract..3
1.2 CAN Driver Routines Overview .3
1.3 Files included in the CAN Driver ApNote4
1.4 Global Variables used by the Driver Routines4
1.5 Notes concerning this ApNote 5
2 Routine #1: Initialization Procedure for the CAN Module7
3 Routine #2: Configuring a Message Object of the CAN Module10
4 Routine #3: Load the data bytes of a Message Object..13
5 Routine #4: Read the data bytes of a Message Object (1..14) 15
6 Routine #5: Read out Message Object 15 (Basic CAN Message Object) 17
7 Routine #6: Send a Message Object .20
8 Routine #7: Check a Message Object (1..14) for new data ..22
9 Routine #8: Check Message Object 15 for new data or new remote frame24
10 Routine #9: Check for a Bus Off Situation in the CAN Module25
11 Hints concerning the CAN Library CAN16X1.LIB26
12 Hints concerning the Example Programs..26
13 Hints concerning the Interrupt Service Routine CISR16X1.C ..30
14 Hints concerning the Header File CREG_16X.H..33
15 Hints concerning the CANalyzer Configuration Files (*.CFG) .33
- 淺談如何評估TI C2000系列微控制器程序的堆棧使用情況
- CAN控制器和收發器
- Keil c166 v7.56 軟件免費下載 89次下載
- TMS570LS系列微控制器的詳細介紹 8次下載
- c166 v7.56官方軟件下載 6次下載
- 高性能16位XA微控制器系列 5次下載
- 以8051微控制器和82527獨立CAN總線控制器為核心組成
- 用C166系列微控制器的通用定時器實現對IIC總線的軟件仿真
- 用C166系列微控制器的CPU時鐘實現對IIC總線的軟件仿真
- 用C166系列微控制器的高速同步串口實現對IIC總線的軟件仿
- 有關CAN協議,將C166和C500微控制器與CAN連接的應
- 億恒C166 系列單片機I2C 總線的軟件模擬
- 關于C166系列微控制器的CAN驅動器例行程序的介紹和使用
- 用C166系列微控制器的CPU時鐘實現對IIC總線的軟件仿真
- VxWorks環境下CAN控制器驅動程序的設計
- 伺服驅動器和伺服控制器的區別 986次閱讀
- 電機驅動器和電機控制器的區別 5477次閱讀
- 基于FPGA的CAN總線控制器的設計 1140次閱讀
- 如何使用MAXQ串行驅動器開發應用 752次閱讀
- 用DS80C51/2微控制器代替Atmel TS80C320U323 884次閱讀
- 使用MAX6951/MAX6950 LED顯示驅動器與MAXQ2000微控制器通信 1032次閱讀
- 介紹控制器實現EtherCAT與RTEX驅動器的回零及其配置 1963次閱讀
- 用于運動控制的柵極驅動器IC 3766次閱讀
- 詳解ABB機器人編程含中英文指令對照 2.1w次閱讀
- digilent開源微控制器介紹 1482次閱讀
- 米爾科技微控制器開發套件介紹 1760次閱讀
- 米爾科技KEIL C166開發工具版本比較 1662次閱讀
- 米爾科技Keil C166 開發工具介紹 1803次閱讀
- 步進電機控制器和驅動器功能區別 5856次閱讀
- CAN總線控制器設計及測試程序 6823次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1491次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 95次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 4次下載 | 免費
- 8基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537793次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多