資料介紹
There are three classes that make up the definition for communication devices: the Communication Device Class,Communication Interface Class and the Data Interface Class. The Communication Device Class is a device level definition and is used by the host to properly identify a communication device that may present several different types
of interfaces. The Communication Interface Class defines a general-purpose mechanism that can be used to enable all
types of communication services on the Universal Serial Bus (USB). The Data Interface Class defines a generalpurpose
mechanism to enable bulk or isochronous transfer on the USB when the data does not meet the requirements
for any other class.
1.1 Scope
Given the broad nature of communication equipment, this specification does not attempt to dictate how all
communication equipment should use the USB. Rather, it defines an architecture that is capable of supporting any
communication device. The current release of the specification focuses on supporting connectivity to
telecommunication services (devices that have traditionally terminated an analog or digital telephone line), and medium
speed networking services (“Always Connected” LAN/WAN media types). The specification currently outlines the
following types of devices:
x Telecommunications devices: analog modems, ISDN terminal adapters, digital telephones, and analog
telephones
x Networking devices: ADSL modems, cable modems, 10BASE-T Ethernet adapters/hubs, and “Ethernet”
cross-over cables.
This specification does not attempt to redefine existing standards for connection and control of communication services. The Communication Class defines mechanisms for a device and host to identify which existing protocols to use. Where possible, existing data formats are used and the transport of these formats are merely enabled by the USB through the definition of the appropriate descriptors, interfaces, and requests. More specifically, this specification describes a framework of USB interfaces, data structures, and requests under which a wide variety of communication devices can be defined and implemented.
of interfaces. The Communication Interface Class defines a general-purpose mechanism that can be used to enable all
types of communication services on the Universal Serial Bus (USB). The Data Interface Class defines a generalpurpose
mechanism to enable bulk or isochronous transfer on the USB when the data does not meet the requirements
for any other class.
1.1 Scope
Given the broad nature of communication equipment, this specification does not attempt to dictate how all
communication equipment should use the USB. Rather, it defines an architecture that is capable of supporting any
communication device. The current release of the specification focuses on supporting connectivity to
telecommunication services (devices that have traditionally terminated an analog or digital telephone line), and medium
speed networking services (“Always Connected” LAN/WAN media types). The specification currently outlines the
following types of devices:
x Telecommunications devices: analog modems, ISDN terminal adapters, digital telephones, and analog
telephones
x Networking devices: ADSL modems, cable modems, 10BASE-T Ethernet adapters/hubs, and “Ethernet”
cross-over cables.
This specification does not attempt to redefine existing standards for connection and control of communication services. The Communication Class defines mechanisms for a device and host to identify which existing protocols to use. Where possible, existing data formats are used and the transport of these formats are merely enabled by the USB through the definition of the appropriate descriptors, interfaces, and requests. More specifically, this specification describes a framework of USB interfaces, data structures, and requests under which a wide variety of communication devices can be defined and implemented.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- USB Class的介紹
- 常用于USB通信分析的USB協議分析工具下載 7次下載
- 51單片機編譯錯誤筆記一(ERROR L104: MULTIPLE PUBLIC DEFINITIONS)
- USB教程及應用實例 7次下載
- USB數據抓包軟件程序下載 7次下載
- USB 3.0存儲發展歷史及展望綜述 42次下載
- PWM調制的無濾波Class D音頻功率放大器的設計 16次下載
- 如何使用MPLAB Harmony USB設備協議棧創建多個邏輯單元的應用程序
- USB+IAP+程序資料下載
- Universal Serial Bus(USB) Comm
- Universal Serial Bus(USB) Devi
- USB Cable & Connector Class Sp
- USB Device Class Specification
- USB Monitor Control Class Spec
- Universal Serial Bus (USB) -De
- 【GD32F303紅楓派開發板使用手冊】第二十講八 USB-虛擬串口實驗 898次閱讀
- 基于MM32F0163D7P的USB Audio Class(UAC)音頻設備 1004次閱讀
- USB基礎學習:USB體系結構介紹 5475次閱讀
- SystemVerilog中class的基本概念 1691次閱讀
- SystemVerilog中class是什么意思 1097次閱讀
- Class-D功放電路如何選擇比較好的國產廠商進行替代 1777次閱讀
- VHF頻段CISPR 25 CLASS 3基準超標整改的案例 5489次閱讀
- USB23年發展史,多了什么變化? 8.2w次閱讀
- 微雪電子USB集線器|USB HUB HAT簡介 2839次閱讀
- RER-USB130W-DM主要應用及規格介紹 1781次閱讀
- USB接口的應用及USB設備具有哪些優勢 1w次閱讀
- USB 3.0電纜與USB 2.0電纜對比分析 5357次閱讀
- USB 3.2接口的特征, USB 3.0和USB 2.0的區別 8.5w次閱讀
- mini usb和micro usb的區別 15.1w次閱讀
- micro usb接口定義圖_micro usb接線圖 74.3w次閱讀
下載排行
本周
- 1HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 2雷達的基本分類方法
- 1.25 MB | 4次下載 | 4 積分
- 3電感技術講解
- 827.73 KB | 2次下載 | 免費
- 4從 MSP430? MCU 到 MSPM0 MCU 的遷移指南
- 1.17MB | 2次下載 | 免費
- 5有源低通濾波器設計應用說明
- 1.12MB | 2次下載 | 免費
- 6RA-Eco-RA2E1-48PIN-V1.0開發板資料
- 35.59 MB | 2次下載 | 免費
- 7面向熱插拔應用的 I2C 解決方案
- 685.57KB | 1次下載 | 免費
- 8愛普生有源晶體振蕩器SG3225EEN應用于儲能NPC、新能源
- 317.46 KB | 1次下載 | 免費
本月
- 12024年工控與通信行業上游發展趨勢和熱點解讀
- 2.61 MB | 763次下載 | 免費
- 2HFSS電磁仿真設計應用詳解PDF電子教程免費下載
- 24.30 MB | 128次下載 | 1 積分
- 3繼電保護原理
- 2.80 MB | 36次下載 | 免費
- 4正激、反激、推挽、全橋、半橋區別和特點
- 0.91 MB | 32次下載 | 1 積分
- 5labview實現DBC在界面加載配置
- 0.57 MB | 21次下載 | 5 積分
- 6在設計中使用MOSFET瞬態熱阻抗曲線
- 1.57MB | 15次下載 | 免費
- 7GBT 4706.1-2024家用和類似用途電器的安全第1部分:通用要求
- 7.43 MB | 14次下載 | 免費
- 8H橋中的電流感測
- 545.39KB | 7次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935113次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420061次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233084次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191360次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183329次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81578次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73804次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65985次下載 | 10 積分
評論
查看更多