資料介紹
本文研究設計了一種基于PC 機與單片機的水下作業控制系統。本控制系統采用的是PC 機與單片機串行通訊的方式,來實現對自動工具庫的可視化控制。在對本計算機控制系統進行介紹時,首先介紹了整個下位機系統的硬件電路,包括電磁閥驅動電路、伺服閥驅動電路和串行通訊電路等。并且簡介了串行通訊的相關內容。在此基礎上介紹了其控制程序和上位機的控制軟件的編制。
關鍵字: 水下作業;電路設計;PC
Abstract: A new control system based on PC and SoC underwater work system is designed in this paper. It iscusses the computer control system. The computer control system adopts PC and single-chip computer by serial ommunication (COM),and realizes the motion of the toolkit. It is the main content of this paper. It discusses the ontrol software of PC and single-chip computer respectively. It indicates that by this control software, the auto oolkit can realize the motion in request and satisfy the request for exchange tools automatically.
Keywords: Underwater Work; Circuit Design; PC
關鍵字: 水下作業;電路設計;PC
Abstract: A new control system based on PC and SoC underwater work system is designed in this paper. It iscusses the computer control system. The computer control system adopts PC and single-chip computer by serial ommunication (COM),and realizes the motion of the toolkit. It is the main content of this paper. It discusses the ontrol software of PC and single-chip computer respectively. It indicates that by this control software, the auto oolkit can realize the motion in request and satisfy the request for exchange tools automatically.
Keywords: Underwater Work; Circuit Design; PC
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 基于CAN總線的水下航行器分布式控制系統 9次下載
- 遙控機器人在深水A油田臥式采油樹作業中的應用資料說明 10次下載
- 一種水下機器人的水面平臺控制系統設計 6次下載
- 小型水下測量機器人的組成及其運動控制系統的設計 10次下載
- 螺桿泵采油作業轉速控制系統研究羅旋 0次下載
- 基于單片機與PC通信的數據采集控制系統設計研究 19次下載
- PC控制系統設計要素 34次下載
- 水下滑翔機器人控制系統設計與實現
- 北極冰下自主遙控機器人控制系統設計
- 基于模糊推理水下作業系統運動控制研究
- 基于PC-based的溫度智能控制系統研究
- 工程設備CAN總線控制系統設計
- 水下滑翔機器人控制系統設計與實現
- 一種基于工業PC的軟PLC控制系統
- PC控制系統設計
- 現場總線控制系統與集散控制系統的對比 767次閱讀
- 前饋控制系統與反饋控制系統的區別 1533次閱讀
- 開環控制系統與閉環控制系統的區別 5579次閱讀
- PLC控制系統與繼電器控制系統的比較 1113次閱讀
- 伺服控制系統與變頻控制系統的比較 699次閱讀
- ROV水下作業仿真平臺:龔嘴水電站壩體檢測和清理作業仿真 1755次閱讀
- 基于西門子S7-200系列PLC實現水下電弧控制系統的設計 895次閱讀
- 基于工控PC+DSP控制器實現磁懸浮軸承控制系統的設計 1812次閱讀
- 水下作業小能手 2483次閱讀
- PC控制系統和驅動技術用于測試單元中的Delta機器人設計 1506次閱讀
- 基于PC104與C8051F120的水下機器人環境監測系統設計方案 2193次閱讀
- 液位控制系統設計_單容水箱液位控制系統設計 2.7w次閱讀
- 基于聲納探測技術的水下三維場景實時成像系統 1.5w次閱讀
- PLC控制系統設計: PLC編程時應注意的問題 1349次閱讀
- 基于Matlab/Simulink的二階控制系統仿真研究 4.1w次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 93次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 11次下載 | 免費
- 6100W短波放大電路圖
- 0.05 MB | 4次下載 | 3 積分
- 7基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 8基于單片機的紅外風扇遙控
- 0.23 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多