資料介紹
提出了一種適合快速響應特點的支持網絡化制造的控制系統的功能模型,為了滿足開放性,可重構能力和系統配置的靈活性要求,系統地論述了使用多智能體系統模型簡化系統結構的原理和實現方法,給出了基于 CORBA 規范的控制實驗系統結構構成和功能劃分,通過監控模塊的實現證明了采用面向?qū)ο蟮?a target='_blank' class='arckwlink_none'>編程技術和CORBA 規范實現支持網絡制造化的控制系統的方法的可行性。
關鍵詞:多智能體代理系統;CORBA;網絡化制造
ABSTRACT: This paper proposes a methods of modeling Networked Manufacturing control system, which is capable of quick responses. To archive the opening reconfiguration and the scalability, the article systematically expounds the theories and the methods of using the Multi-Agent system model to simplify the system structure, tells the demo system structure and the function modules, proves the feasibility of realizing the Networked Manufacturing system with OOP methods in CORBA specification..
Key Words: Multi-Agent system CORBA Networked manufacturing Control system
關鍵詞:多智能體代理系統;CORBA;網絡化制造
ABSTRACT: This paper proposes a methods of modeling Networked Manufacturing control system, which is capable of quick responses. To archive the opening reconfiguration and the scalability, the article systematically expounds the theories and the methods of using the Multi-Agent system model to simplify the system structure, tells the demo system structure and the function modules, proves the feasibility of realizing the Networked Manufacturing system with OOP methods in CORBA specification..
Key Words: Multi-Agent system CORBA Networked manufacturing Control system
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- 網絡化制造環境下制造企業知識管理研究與應用_邰麗君 0次下載
- 基于混合架構的油脂生產網絡化計量管理控制系統_王莉 0次下載
- 基于Zigbee技術的智能窗簾網絡化控制系統 148次下載
- 基于單片機的網絡化路燈控制系統設計 148次下載
- 轉子振動試驗網絡化測試系統實現 24次下載
- 網絡化電機控制系統設計
- 基于調度的網絡化控制系統
- 污水處理廠網絡化控制系統的研究
- 一類網絡化串級控制系統的分析與建模
- 網絡化制造中企業應用系統集成方法研究
- 網絡化控制系統中的多包傳輸
- 自適應控制在網絡化控制系統中的應用
- 智能網絡化模糊控制系統的設計與研究
- 網絡化資源配置中的制造資源模型研究
- 嵌入式設備的網絡化方法研究
- 工業控制系統安全性分析與對策 828次閱讀
- 電機控制系統的神經網絡優化策略 380次閱讀
- 什么是現場總線控制系統?它有哪些特點? 850次閱讀
- 自動化控制系統的基本知識 3745次閱讀
- 基于藍牙技術實現無線網絡化傳感器的設計與應用研究 2544次閱讀
- 基于W78E58單片機和傳輸控制協議實現網絡化智能傳感器的應用方案 2782次閱讀
- 采用ABBAC3150系列PLC和Modbus協議實現流漿箱控制系統的設計 1516次閱讀
- 基于LonWorks現場總線的EIC2000開放控制系統的設計 856次閱讀
- CAN總線實現運動控制系統網絡化的軟硬件設計 3291次閱讀
- 基于Simulink的嵌入式網絡化控制仿真系統實現 2773次閱讀
- 基于網絡的數據采集與控制系統輕松實現 3445次閱讀
- 基于STM32F407的網絡化智能車燈控制系統 6642次閱讀
- 基于嵌入式和ZigBee的網絡化智能家居系統 2494次閱讀
- 基于ARM的擴散/氧化控制系統的設計 1225次閱讀
- 城市安防系統無線網絡化的實現方案 925次閱讀
下載排行
本周
- 1電子電路原理第七版PDF電子教材免費下載
- 0.00 MB | 1490次下載 | 免費
- 2單片機典型實例介紹
- 18.19 MB | 93次下載 | 1 積分
- 3S7-200PLC編程實例詳細資料
- 1.17 MB | 27次下載 | 1 積分
- 4筆記本電腦主板的元件識別和講解說明
- 4.28 MB | 18次下載 | 4 積分
- 5開關電源原理及各功能電路詳解
- 0.38 MB | 10次下載 | 免費
- 6基于AT89C2051/4051單片機編程器的實驗
- 0.11 MB | 4次下載 | 免費
- 7基于單片機和 SG3525的程控開關電源設計
- 0.23 MB | 3次下載 | 免費
- 8基于單片機的紅外風扇遙控
- 0.23 MB | 3次下載 | 免費
本月
- 1OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 2PADS 9.0 2009最新版 -下載
- 0.00 MB | 66304次下載 | 免費
- 3protel99下載protel99軟件下載(中文版)
- 0.00 MB | 51209次下載 | 免費
- 4LabView 8.0 專業版下載 (3CD完整版)
- 0.00 MB | 51043次下載 | 免費
- 5555集成電路應用800例(新編版)
- 0.00 MB | 33562次下載 | 免費
- 6接口電路圖大全
- 未知 | 30320次下載 | 免費
- 7Multisim 10下載Multisim 10 中文版
- 0.00 MB | 28588次下載 | 免費
- 8開關電源設計實例指南
- 未知 | 21539次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935053次下載 | 免費
- 2protel99se軟件下載(可英文版轉中文版)
- 78.1 MB | 537791次下載 | 免費
- 3MATLAB 7.1 下載 (含軟件介紹)
- 未知 | 420026次下載 | 免費
- 4OrCAD10.5下載OrCAD10.5中文版軟件
- 0.00 MB | 234313次下載 | 免費
- 5Altium DXP2002下載入口
- 未知 | 233046次下載 | 免費
- 6電路仿真軟件multisim 10.0免費下載
- 340992 | 191183次下載 | 免費
- 7十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183277次下載 | 免費
- 8proe5.0野火版下載(中文版免費下載)
- 未知 | 138039次下載 | 免費
評論
查看更多