• ADP5588
• ADP5587

• ADP5588-EVALZ
• ADP5587CB-EVALZ
• ADP5587CP-EVALZ

The driver supports multiple key press detection and resolution.
It independently delivers key press and key release events in
chronological order to the Linux input device system.

This allows SHIFT + ANYKEY, ALT + F1 or CTRL + ALT + DEL sequences.

Since the ADP5588 buffers events in its internal FIFO,
it’s unlikely that events are lost due to heavy system
load and interrupt latencies.

• Configurable keypad size matrix (rows, columns).
• Support for switch events.
• Enabling and disabling automatic key repeat feature.
• Lock/Unlock key feature.
• Unused row and column pins are exported general-purpose inputs/outputs to GPIOLIB

EOF c linux-kernel>

static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_KEYBOARD_ADP5585) || defined(CONFIG_KEYBOARD_ADP5585_MODULE)
	{
		I2C_BOARD_INFO("adp5585-keys", 0x34),
		.irq = IRQ_PG0,
		.platform_data = (void *)&adp5585_kpad_data,
	},
#endif
}

Configure kernel with “make menuconfig” (alternatively use “make xconfig” or “make qconfig”)

The ADP5588 Driver depends on CONFIG_I2C

  --- Input Device Support
  <*> Generic input layer (needed for keyboard, mouse, ...)
  < >   Support for memoryless force-feedback devices
  ---   Userland interfaces
  < >   Mouse interface
  < >   Joystick interface
  < >   Touchscreen interface
     Event interface
  < >   Event debugging
  ---   Input Device Drivers
  [*]   Keyboards  —>

	  --- Keyboards
	  < >   AT keyboard
	  < >   Sun Type 4 and Type 5 keyboard
	  < >   DECstation/VAXstation LK201/LK401 keyboard
	  < >   XT keyboard
	  < >   Newton keyboard
	  < >   Stowaway keyboard
	  < >   GPIO Buttons
	  < >   OpenCores Keyboard Controller
	  <M>   ADP5588 I2C QWERTY Keypad and IO Expander

  [ ]   Mouse  --->
  [ ]   Joysticks  --->
  [ ]   Touchscreens  --->
  [ ]   Miscellaneous devices  --->
      Hardware I/O ports  --->

There is no dedicated Blackfin STAMP evaluation board for the ADP5588. During test and driver development we used the ADP5588 Demo Mother/Daughter Board.

It can be easily wired to the Blackfin STAMP TWI/I2C header.

When the driver is loaded, you should see positive output that it found the ADP5588 device.

root:/> modprobe adp5588_keys
input: adp5588-keys as /class/input/input0
adp5588-keys 0-0034: Rev.2 keypad, irq 66

root:/> modprobe evdev

root:/> event_test /dev/input/event0
Input driver version is 1.0.0
Input device ID: bus 0x18 vendor 0x1 product 0x1 version 0x2
Input device name: "adp5588-keys"
Supported events:
  Event type 0 (Reset)
    Event code 0 (Reset)
    Event code 1 (Key)
  Event type 1 (Key)
    Event code 1 (Esc)
    Event code 2 (1)
    Event code 3 (2)
    Event code 4 (3)
    Event code 5 (4)
    Event code 6 (5)
    Event code 7 (6)
    Event code 8 (7)
    Event code 9 (8)
    Event code 10 (9)
    Event code 11 (0)
    Event code 12 (Minus)
    Event code 13 (Equal)
    Event code 14 (Backspace)
    Event code 15 (Tab)
    Event code 16 (Q)
    Event code 17 (W)
    Event code 18 (E)
    Event code 19 (R)
    Event code 20 (T)
    Event code 21 (Y)
    Event code 22 (U)
    Event code 23 (I)
    Event code 24 (O)
    Event code 25 (P)
    Event code 26 (LeftBrace)
    Event code 27 (RightBrace)
    Event code 28 (Enter)
    Event code 30 (A)
    Event code 31 (S)
    Event code 32 (D)
    Event code 33 (F)
    Event code 34 (G)
    Event code 35 (H)
    Event code 36 (J)
    Event code 37 (K)
    Event code 38 (L)
    Event code 39 (Semicolon)
    Event code 40 (Apostrophe)
    Event code 41 (Grave)
    Event code 43 (BackSlash)
    Event code 44 (Z)
    Event code 45 (X)
    Event code 46 (C)
    Event code 47 (V)
    Event code 48 (B)
    Event code 49 (N)
    Event code 50 (M)
    Event code 51 (Comma)
    Event code 52 (Dot)
    Event code 53 (Slash)
    Event code 57 (Space)
    Event code 71 (KP7)
    Event code 72 (KP8)
    Event code 73 (KP9)
    Event code 74 (KPMinus)
    Event code 75 (KP4)
    Event code 76 (KP5)
    Event code 77 (KP6)
    Event code 79 (KP1)
    Event code 80 (KP2)
    Event code 81 (KP3)
    Event code 82 (KP0)
    Event code 83 (KPDot)
    Event code 86 (102nd)
    Event code 96 (KPEnter)
    Event code 103 (Up)
    Event code 105 (Left)
    Event code 106 (Right)
    Event code 108 (Down)
    Event code 111 (Delete)
Testing ... (interrupt to exit)
Event: time 219561.256000, type 1 (Key), code 41 (Grave), value 1
Event: time 219561.256000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219561.464000, type 1 (Key), code 41 (Grave), value 0
Event: time 219561.464000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219561.968000, type 1 (Key), code 2 (1), value 1
Event: time 219561.968000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219562.176000, type 1 (Key), code 2 (1), value 0
Event: time 219562.176000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219562.608000, type 1 (Key), code 3 (2), value 1
Event: time 219562.608000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219562.868000, type 1 (Key), code 3 (2), value 0
Event: time 219562.868000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219563.628000, type 1 (Key), code 4 (3), value 1
Event: time 219563.628000, type 0 (Reset), code 0 (Reset), value 0
Event: time 219563.888000, type 1 (Key), code 4 (3), value 0
Event: time 219563.888000, type 0 (Reset), code 0 (Reset), value 0