電子發燒友App

硬聲App

搜索歷史

清空
搜索熱詞
      0
      • 聊天消息
      • 系統消息
      • 評論與回復
      VIP于 到期 續費
      登錄后你可以
      • 下載海量資料
      • 學習在線課程
      • 觀看技術視頻
      • 寫文章/發帖/加入社區
      會員中心
      創作中心
      發布
      創作活動

      完善資料讓更多小伙伴認識你，還能領取20積分哦，立即完善>

      3天內不再提示
      創作
      電子發燒友網>電子資料下載>類型>參考設計>數字電位器Linux驅動程序

      數字電位器Linux驅動程序

      2021-04-21 | pdf | 191.09KB | 次下載 | 2積分

      資料介紹

      This version (05 Jan 2021 17:01) was approved by Ioana Chelaru.The Previously approved version (20 Nov 2015 16:36) is available.Diff

      Table of Contents

      Digital Potentiometer Linux Driver

      Supported Devices

      Reference Circuits

      Evaluation Boards

      Description

      The ad525x_dpot driver exports a simple sysfs interface. This allows you to work with the immediate resistance settings as well as update the saved startup settings. Access to the factory programmed tolerance is also provided, but interpretation of this settings is required by the end application according to the specific part in use.

      Files

      Each dpot device will have a set of eeprom, rdac, and tolerance files. How many depends on the actual part you have, as will the range of allowed values.

      The eeprom files are used to program the startup value of the device.

      The rdac files are used to program the immediate value of the device.

      The tolerance files are the read-only factory programmed tolerance settings and may vary greatly on a part-by-part basis. For exact interpretation of this field, please consult the datasheet for your part. This is presented as a hex file for easier parsing.

      Source Code

      Status

      Source Mainlined?
      git Yes

      Files

      Example platform device initialization

      For compile time configuration, it’s common Linux practice to keep board- and application-specific configuration out of the main driver file, instead putting it into the board support file.

      For devices on custom boards, as typical of embedded and SoC-(system-on-chip) based hardware, Linux uses platform_data to point to board-specific structures describing devices and how they are connected to the SoC. This can include available ports, chip variants, preferred modes, default initialization, additional pin roles, and so on. This shrinks the board-support packages (BSPs) and minimizes board and application specific #ifdefs in drivers.

      21 Oct 2010 16:10

      Example Platform / Board file (I2C Interface)

      Declaring I2C devices

      Unlike PCI or USB devices, I2C devices are not enumerated at the hardware level. Instead, the software must know which devices are connected on each I2C bus segment, and what address these devices are using. For this reason, the kernel code must instantiate I2C devices explicitly. There are different ways to achieve this, depending on the context and requirements. However the most common method is to declare the I2C devices by bus number.

      This method is appropriate when the I2C bus is a system bus, as in many embedded systems, wherein each I2C bus has a number which is known in advance. It is thus possible to pre-declare the I2C devices that inhabit this bus. This is done with an array of struct i2c_board_info, which is registered by calling i2c_register_board_info().

      So, to enable such a driver one need only edit the board support file by adding an appropriate entry to i2c_board_info.

      For more information see: Documentation/i2c/instantiating-devices

      21 Oct 2010 16:10 
      static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
	{
		I2C_BOARD_INFO("ad5245", 0x2c),
	},
	{
		I2C_BOARD_INFO("ad5245", 0x2d),
	},
#endif
}

      Example Platform / Board file (SPI Interface)

      Declaring SPI slave devices

      Unlike PCI or USB devices, SPI devices are not enumerated at the hardware level. Instead, the software must know which devices are connected on each SPI bus segment, and what slave selects these devices are using. For this reason, the kernel code must instantiate SPI devices explicitly. The most common method is to declare the SPI devices by bus number.

      This method is appropriate when the SPI bus is a system bus, as in many embedded systems, wherein each SPI bus has a number which is known in advance. It is thus possible to pre-declare the SPI devices that inhabit this bus. This is done with an array of struct spi_board_info, which is registered by calling spi_register_board_info().

      For more information see: Documentation/spi/spi-summary

      21 Oct 2010 16:10 
      static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
	{
		.modalias = "ad5291",
		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
		.bus_num = 0,
		.chip_select = 1,
	},
#endif
};

      Old Method 

      static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
	{
		.modalias = "ad_dpot",
		.platform_data = "ad5291",
		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
		.bus_num = 0,
		.chip_select = 1,
	},
#endif
};

      Adding Linux driver support

      Configure kernel with “make menuconfig” (alternatively use “make xconfig” or “make qconfig”)

      The ad525x_dpot driver depends on CONFIG_SPI or CONFIG_I2C 

      Device Drivers  --->
  [*] Misc devices  --->
    <*>   Analog Devices Digital Potentiometers
    <*>     support I2C bus connection
    <*>     support SPI bus connection

      Hardware configuration

      PmodDPOT, ADSP-BF537 EZKIZ

      Driver testing

      Locate the device in your sysfs tree. This is probably easiest by going into the common i2c directory and locating the device by the i2c slave address. 

       
	# ls /sys/bus/i2c/devices/
	0-0022  0-0027  0-002f
      So assuming the device in question is on the first i2c bus and has the slave address of 0x2f, we descend (unrelated sysfs entries have been trimmed). 

        
	# ls /sys/bus/i2c/devices/0-002f/
	eeprom0 rdac0 tolerance0
      You can use simple reads/writes to access these files: 

       
	# cd /sys/bus/i2c/devices/0-002f/
 
	# cat eeprom0
	0
	# echo 10 > eeprom0
	# cat eeprom0
	10
 
	# cat rdac0
	5
	# echo 3 > rdac0
	# cat rdac0
	3

      More Information

      下載該資料的人也在下載 下載該資料的人還在閱讀
      更多 >

      評論

      查看更多

      下載排行

      本周

      1. 1電子電路原理第七版PDF電子教材免費下載
      2. 0.00 MB  |  1491次下載  |  免費
      3. 2單片機典型實例介紹
      4. 18.19 MB  |  95次下載  |  1 積分
      5. 3S7-200PLC編程實例詳細資料
      6. 1.17 MB  |  27次下載  |  1 積分
      7. 4筆記本電腦主板的元件識別和講解說明
      8. 4.28 MB  |  18次下載  |  4 積分
      9. 5開關電源原理及各功能電路詳解
      10. 0.38 MB  |  11次下載  |  免費
      11. 6100W短波放大電路圖
      12. 0.05 MB  |  4次下載  |  3 積分
      13. 7基于單片機和 SG3525的程控開關電源設計
      14. 0.23 MB  |  4次下載  |  免費
      15. 8基于AT89C2051/4051單片機編程器的實驗
      16. 0.11 MB  |  4次下載  |  免費

      本月

      1. 1OrCAD10.5下載OrCAD10.5中文版軟件
      2. 0.00 MB  |  234313次下載  |  免費
      3. 2PADS 9.0 2009最新版 -下載
      4. 0.00 MB  |  66304次下載  |  免費
      5. 3protel99下載protel99軟件下載(中文版)
      6. 0.00 MB  |  51209次下載  |  免費
      7. 4LabView 8.0 專業版下載 (3CD完整版)
      8. 0.00 MB  |  51043次下載  |  免費
      9. 5555集成電路應用800例(新編版)
      10. 0.00 MB  |  33562次下載  |  免費
      11. 6接口電路圖大全
      12. 未知  |  30320次下載  |  免費
      13. 7Multisim 10下載Multisim 10 中文版
      14. 0.00 MB  |  28588次下載  |  免費
      15. 8開關電源設計實例指南
      16. 未知  |  21539次下載  |  免費

      總榜

      1. 1matlab軟件下載入口
      2. 未知  |  935053次下載  |  免費
      3. 2protel99se軟件下載(可英文版轉中文版)
      4. 78.1 MB  |  537793次下載  |  免費
      5. 3MATLAB 7.1 下載 (含軟件介紹)
      6. 未知  |  420026次下載  |  免費
      7. 4OrCAD10.5下載OrCAD10.5中文版軟件
      8. 0.00 MB  |  234313次下載  |  免費
      9. 5Altium DXP2002下載入口
      10. 未知  |  233046次下載  |  免費
      11. 6電路仿真軟件multisim 10.0免費下載
      12. 340992  |  191183次下載  |  免費
      13. 7十天學會AVR單片機與C語言視頻教程 下載
      14. 158M  |  183277次下載  |  免費
      15. 8proe5.0野火版下載(中文版免費下載)
      16. 未知  |  138039次下載  |  免費