adxl343三軸數(shù)字式MEMS加速度計(jì)數(shù)據(jù)表

　　The ADXL343 is a versatile 3-axis， digital-output， low g MEMS accelerometer. Selectable measurement range and bandwidth， and configurable， built-in motion detection make it suitable for sensing acceleration in a wide variety of applications. Robustness to 10，000 g of shock and a wide temperature range （?40°C to +85°C） enable use of the accelerometer even in harsh environments. The ADXL343 measures acceleration with high resolution （13-bit） measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either an SPI （3- or 4-wire） or I2 C digital interface. The ADXL343 can measure the static acceleration of gravity in tilt-sensing applications， as well as dynamic acceleration resulting from motion or shock. Its high resolution （3.9 mg/LSB） enables measurement of inclination changes less than 1.0°。 Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in， first out （FIFO） buffer can be used to store data to minimize host processor activity and lower overall system power consumption. The ADXL343 is supplied in a small， thin， 3 mm × 5 mm × 1 mm， 14-terminal， plastic package.