多通道采樣鍵準確的電力線路監測

　　多通道采樣鍵準確的電力線路監測

　　準確的電力線監測已成為一個重要的要求，不僅集中在電網本身，而且在其邊緣。對于電網并列的能量收集發電系統，甚至終端設備，持續的電能質量特性的分析，有助于確保電網和附加系統的健康。在電力監控系統的心臟，模擬數字轉換器（ADC）在測量線電壓和電流在一個水平的精度適合每個應用起著關鍵性的作用。工程師可以滿足一系列的要求從實用級系統的精度需要收入的目的基本電力監控線路故障，利用高性能ADC檢測和相關部件制造商包括模擬設備，科寶電子，Intersil，線性技術，集成，芯片技術，半導體，脈沖電子、德克薩斯文書。

　　在最基本的層面上，電力監控系統依賴于測量瞬時電壓和電流用電流互感器（CTS）和電壓互感器（稱為PT，電壓互感器）輸出轉換的高速ADCs（圖1）。反過來，處理器使用的瞬時電流和電壓測量計算的關鍵特性，包括有功功率，無功功率，視在功率和功率因數，甚至更復雜的計算，如諧波，這可能會導致設備損壞。

　　Figure 1： A typical power-monitoring system samples line current and voltage， using high-speed analog-digital converters （ADCs） to provide high-resolution data to the host processor for calculation of power parameters. （Courtesy of Texas Instruments）

　　Performing these power calculations depends foremost on accurately measured voltage and current. Standards such as ANSI C12.20 for North America and IEC 62053 dictate specific accuracy levels such as Class 0.2， which requires ± 0.2 percent accuracy. In practice， power-measurement systems are typically designed to surpass standard accuracy specifications—relying on high-sample rates and high-resolution converters to capture high-speed transients and to ensure reliable calculation of more complex characteristics such as multiple harmonics.