基于多模型的動態矩陣控制Dynamic Matrix Con

針對動態特性隨工況而變化的復雜工業過程，本文提出一種基于多模型的動態矩陣控制。根據被控對象參數的變化范圍建立多個模型，同時建立以模型輸出誤差為變量的具有積分特點的指標切換函數。在每一采樣時刻根據指標函數與實際對象最接近的模型，并將基于此模型的控制器切換為當前控制器。仿真結果表明對多工況的控制令人滿意。
關鍵詞：多模型預測控制，動態矩陣控制，多模型
Abstract：The purpose of this paper is to extend dynamic matrix control (DMC) to handle process with several operating levels based on multiple-model approach. A continuum of DMC controllers are developed which are supervised by a high-level switching logic. Performance index based on the error between the actual output and the predicted output is employed to generate the switching logic. Simulation results are given to show the effectiveness of this method.
Key Words: multiple model predictive control ; dynamic matrix control ; multiple models